ScanX Scout Portable Digital X-ray system with re-usable flexible film plates.

ScanX Scout is a high performance portable digital X-ray system combining high sensitivity flexible film plates, a rugged battery powered image plate reader and a laptop or detailed forensic level X-ray inspection across the full spectrum of security and defence applications.

ScanX Scout image plates are very thin and flexible or easy access into confined areas and or wrapping around objects of interest. The image plates are available in a range of sizes to suit the task you’re working on and can be used individually or mounted in multiple combinations to investigate larger objects.

CR X-ray image plates require no cables nor batteries or use and the entire X-ray operation from setting up the scanner, placing the X-ray plate, X-ray acquisition and image plate scanning can be completed in less than 2 minutes.

Plates can be used over 1000 times and can be erased during the scanning process to allow immediate reuse.

The ScanX Scout Image Plate Reader scans the plates either on mains or battery power to produce ultra high resolution X-ray images in as little as 35 seconds. Its ability to reveal fine wire and electronic component detail makes it an in- valuable system or those needing to make fast accurate decisions in the field and equally or lab-based forensic and analytical tasks.

• Portable and easy to set up and use in less than 2 minutes
• Thin flexible X-ray image plates in a range of standard sizes from 18 x 24 cm up to 35 x 43 cm
• Long X-ray plates in sizes 35 x 90 cm and 35 x 130 cm
• Image Resolution from 300-50 microns and 3.8-5 lp/mm (dependent on x-ray source, x-ray software and type of image plate used)
• Scan and erase the reusable plates in a single pass
• Battery powered for mobile field operations
• Resolution: Vertical: 3.8 to 5.0 lp/mm.
• Resolution Horizontal: 3.8 to 7.0 lp/mm

CR Digital X-ray Image Plates are used with the ScanX Scout and CR35 X-ray processors to take high definition x-rays. Image plates are thin, flat, flexible and re-usable up to a thousand times. They are lightweight (only 100 grams), easy to deploy with no cables or connections required.

• Flexible
• Lightweight
• Reusable Up To 1,000 Times

Flexray X-ray Image Plate Mounting Systems combine multiple CR image plates into a variety of formats to inspect larger surface areas in a single x-ray shot. The ability to examine large objects in a single x-ray exposure, reduces your returns to the target area and ultimately your time on task.

• 1417-4 = Kit for 4 x 35 x 43 cm image plates
• 1417-9 = Kit for 9 x 35 x 43 cm image plates
• 1436-3 = kit for 3 x 35 x 90 cm image plates
• 1451-3 = kit for 3 x 35 x 130cm image plates
• Custom sizes on request

Operators control and fire the X-ray generator to
remotely capture images using the Scanview software on the laptop controller. Images are transmitted instantaneously via a data cable or wirelessly. Multiple repeat exposures can be taken without the need to re-approach the target.

Supplied in rugged wheeled pelicase with x-ray generator, laptop control and 50m cable on reel.

• Range of Image Sizes: Scantrak comes in 4 four standard sizes: a compact 20 x 25 cm or 25 x 33 cm and larger format 28 x 38 cm and 33 x 43 cm for checking objects such as hand luggage. Custom size imagers are also available.
• Safe: The X-ray Generator is controlled from a distance using the system’s Scanview software. Multiple X-rays of varying exposure times can be taken in seconds without the need to re-approach the target.
• Simple design: Scantrak is designed to be easy to set up and use. It combines just three core components – ICU, X-ray generator and laptop.

Scanwedge Imaging Panels are extremely robust with no moving parts and no fragile glass components. The x-ray detector panel operates via cable or Wi-Fi connection and without the separate bulky control box that many flat panel x-ray systems require. The new high sensitivity camera provides higher resolution images resulting in improved detection of threats

The complete Scanwedge Ultra x-ray system is perfect rapid deployment x-ray tool for any defence and security search professional as it comprises just 3 components (x-ray generator, imaging panel and laptop/tablet) which can be set up in less than 2 minutes. The system is backpackable and performs equally well for suspect package checks in built up urban areas as for C-IED tasks in dangerous conflict zones.

Applications include IED/EOD, search and investigation, unattended baggage checks, and for detecting weapons and hidden contraband material.

• Scanwedge is designed to be easy to set up and operate in under 5 minutes. It combines just 3 core components – X-ray imager, X-ray generator and laptop
• Scanwedge is lightweight, rugged and man-portable. The compact flat panel is designed for easy access in confined areas
• The X-ray generator is controlled from a distance using the system’s Scanview software. Multiple X-rays of varying exposure times can be taken in seconds without the need to re-approach
• Scanwedge is compatible with both Golden pulsed X-ray generators and industrial X-ray sources
• Scanwedge is a real time X-ray system and does not require any expensive consumables or processing equipment

The imaging area is 430 x 573 mm and offers 140 micron high resolution images.

SCANSILC 4357U operates seamlessly with both pulsed and CP x-ray generators. Operators can control in sync mode from a tablet or laptop without needing an extra interface communications box. Alternative stand-alone (AED) mode with the x-ray generator triggered manually.

Two in-panel batteries allow for extended field operation.

Scansilc 1824 is a portable X-ray system designed to meet the specific needs of fast moving bomb techs and those involved in covert search bomb disposal and security tasks. This is the future of portable X-ray for tactical operations.

Scansilc is designed for rapid grab-and-go deployment and comprises a small lightweight x-ray generator, compact rugged detector panel and a viewing tablet.

A complete x-ray system weighs under 5kg and can be easily deployed discreetly from a small case or backpack.

The Scansilc detector panel produces a market-leading (76 micron) high definition x-ray image, allowing operators to investigate suspicious items with confidence. The detector panel is water and dust-proof – ideal for operation in the field and resilient enough for CBRNE and decontamination – Ingress and Water resistant to IP67.

SCANNO mode is the new innovative way to operate your portable x-ray system.

With grab-and-go deployment and Auto Exposure Detection (AED), a manual X-ray firing is detected and the X-ray image of the target’s internal contents is immediately seen.

NO more long trailing cables to worry about, NO power interface boxes to connect in, NO communications hubs, NO wi-fi drop out in the middle of a task, no heavy case. Just 3 key components to make your job easy and hassle free.

With a clear image generated in seconds, this is ideal for busy transport hubs where unattended bags need rapid inspection and for building sweeps where officers need to deploy quickly and discreetly

Alphanumeric Readout
Seven characters can be programmed into each memory channel to conveniently display
station names or ship names for simplified operation.

150 W Output Power
A large cooling fan system, in combination with the aluminum chassis, allows conditions for transmission at a full 150 W* (PEP) RF output power—even during demanding RTTY (radio teletype) operation.

*60 W (PEP) above 24 MHz bands.

Other Features

• General coverage receiver
• Terminals for frequency/mode control via NMEA interfacing
• Automatic tuning function
• Large, front-mounted speaker
• Weather fax ready
• Backlight control
• CW full break-in and semi break-in
• 2-tone alarm built-in (Optional depending on version)
• 1136 channels available

Easy operation with easy-to-grip body and large buttons
The IC-M37 has a slim-designed body and big buttons, allowing for easy operation even while wearing gloves during fishing or sailing. This enables quick replies to calls. Additionally, the IC-M37 provides instant access to channel 16, as well as the Call channel.

Loud Audio Output
The IC-M37 provides a powerful 700 mW (typical) audio output. Received voice can be heard loud and clear. It helps you to hear calls even in noisy onboard environments.

12 Hours Long Time Operation
The BP-296 Li-ion battery pack, providing an operating time of approximately 12 hours for a full day of cruising or fishing experience. For added peace of mind during emergencies, the optional BP-297 battery case is also available.
*Approximate. Tx: Rx: Standby = 5 : 5 : 90.

IP57 Dust-tight and Waterproof Protection
The IC-M37 boasts exceptional IP57 waterproof protection, ensuring its safety even when submerged in water up to a depth of 1 meter for 30 minutes. Feel confident using it on deck or in dusty environments without any concerns.

Float’n Flash™ Function
If you accidentally drop the IC-M37 into the water, it will float, flash and sound an alarm. The buoyancy, the flashing light, and the sound reduce the risk of loss at sea even at night.

AquaQuake™ Water Draining Function
The AquaQuake™ prevents audio degradation from a water-logged speaker. This function removes water from the speaker grill by vibrating the speaker cone. You can hear clear audio with this function.

6 W RF Output Power
The IC-M37’s 6 Watts of transmit power provides extended communication range for the user.

Dualwatch and Tri-watch Functions
The Dualwatch and Tri-watch functions allow for periodic checking of Channel 16 while operating on another channel. This feature proves convenient when communicating with your friends’ vessels or during sailing regattas, enabling you to make important announcements about the race.

Monitor Function
When receiving signal is weak and difficult to hear, you can use the Monitor function to open the squelch and help you hear the signal.

Additional features

• Low Battery Alert function notifies you of low battery level
• Voice Loud and Mute function enables to temporary maximize/mute the volume
• Channel history function stores the last five channels used for easy recall
• Various Scan functions (normal/priority)
• Favorite Channel function
• BP-296 user replaceable Li-ion battery pack supplied
• Weather channels with Weather Alert function
• Lock function
• Power Save function
• Backlight function for night time opeartion
• LCD contrast selection

Lightweight and Compact Body
The IC-M25 is the lightest weight floating marine radio* (218 g; 7.7 oz). Its slim depth (30.5 mm, 1.2 in) can be comfortably operated with one hand. These features make it easier to equip, carry and operate for a long time.
*As of June 2022, researched by Icom.

Float’n Flash™
If you accidentally drop the IC-M25 into the water, it will float, flash and sound an alarm. The buoyancy, the flashing light, and the sound reduce the risk of loss at sea.

11 Hours of Battery Life
The built-in 1570 mAh (typical) Li-ion battery realizes 5 Watts (approx.) output power and 11 hours of operation*.
* Typical operation with Tx (Hi): Rx: Standby=5:5:90

700 mW Audio Output
The IC-M25 provides a powerful 700 mW (typical) audio output and received voice can be heard loud and clear.

Easy-to-Use
On the front panel, the function keys are good-sized and simply laid out. The large display features big channel numbers supporting 4-digit channels and automatic backlighting.

USB Charging (Micro-B USB type)
The IC-M25 adopts a micro-B USB charger connector* widely used on mobile devices. The built-in Li-ion battery pack can be charged quickly in three hours (approx.).
*The IC-M25 accepts 5 V/1 A (Max.) input. Use of third-party products is not guaranteed.

Optional Speaker-Microphone, HM-213
The optional waterproof speaker-microphone, HM-213, provides commercial grade convenience while mounting the radio on the waist. The radio floats even when the HM-213 is attached.

Other Features

• IPX7 waterproof construction
• (1m depth of water for 30 minutes)
• 4-step battery life indicator
• 2-step power save function
• Weather channel with weather alert
• Dual/Tri-watch functions
• Instant access to Ch 16 or programmable call channel
• Favorite channel function
• Monitor function opens noise squelch
• Auto scan function
• Display auto backlighting
• AquaQuake™ prevents audio degradation from a water-logged speaker